RETRACTED: Monitoring Air Pada Water Torn Berbasis Android dan Mikrokontroller

Main Article Content

Anggie Meifriyan Pratama
Dwiny Meidelfi
Deddy Prayama

Abstract

Control and monitoring of water in a tank is a computer instrumentation needed in industry. This final project discusses a water monitoring application in water tornautomatically based on android and supported by a microcontroller. One of the developing technology fields is microcontroller technology. In designing this device, it uses a NodeMCU microcontroller as a data processor and an ultrasonicsensor as data input as well as a buzzer and servo. An ultrasonic sensor is a devicethat can measure the distance of an object by utilizing reflected ultrasonic waves. This water monitoring uses firebase as a database to store data. To displaymeasurement data, the interface is also designed using the Android Studioapplication software in the form of graphs, pump status, and water notifications.The test results show that the ultrasonic sensor used is able to measure water levels from 2 cm to 20 cm with an average measurement error of 4.93%. Water monitoringis designed to be able to produce a system output response according to thereference value given. In addition, water level monitoring can be displayed on the Android software interactively

Article Details

How to Cite
Meifriyan Pratama, A., Meidelfi, D., & Prayama, D. (2020). RETRACTED: Monitoring Air Pada Water Torn Berbasis Android dan Mikrokontroller. JITSI : Jurnal Ilmiah Teknologi Sistem Informasi, 1(3), 97 - 107. https://doi.org/10.30630/jitsi.1.3.14
Section
Articles

References

[1] E. Dewanto and J. Yoseph, “Tandon Air Otomatis Dengan Sistem Monitoring Melalui Android Berbasis Arduino Uno,” Autocracy, vol. 5, no. 1, pp. 8–16, 2018, doi: 10.21009/autocracy.05.1.2.
[2] Achmad Faiz Sanusi, “Prototipe Sistem Pemantau Ketinggian Level Air Sungai Jarak Jauh Berbasis Iot (Internet of Things) Dengan Nodemcu,” 2018.
[3] A. Alawiah and A. Rafi Al Tahtawi, “Sistem Kendali dan Pemantauan Ketinggian Air pada Tangki Berbasis Sensor Ultrasonik,” KOPERTIP J. Ilm. Manaj. Inform. dan Komput., vol. 1, no. 1, pp. 25–30, 2017, doi: 10.32485/kopertip.v1i1.7.
[4] Eka Rizky Yulianti, “PROTOTYPE SISTEM ALARM BANJIR MENGGUNAKAN INTERNET OF THINGS (IoT) BERBASIS ARDUINO VIA APLIKASI ANDROID,” pp. 5–10, 2019.
[5] W. Annisa and A. Rahmadiansah, “Rancang Bangun Sistem Monitoring Temperatur Pada Proses Rekristalisasi Di Plant Pemurnian Garam Rakyat Berbasis IoT,” Tugas Akhir, 2017.
[6] E. B. Lewi, U. Sunarya, and D. N. Ramadhan, “Sistem Monitoring Ketinggian Air Berbasis Internet of Things Menggunakan Google Firebase,” Univ. Telkom, D3 Tek. Telekomun., vol. 1, no. 1, pp. 1–8, 2017.
[7] C. D. N. Tulle, “Monitoring Volume Cairan Dalam Tabung (Drum Silinder) dengan Sensor Ultrasonik Berbasis WEB,” pp. 3–9, 2017.
[8] Nurhayati, Novriyenni, and I. Ilham, “AUTOMATIC WATER TANK PUMP SWITCHER USING MICROKONTROLLER Abstrak,” J. Tek. Inform. Kaputama, vol. 1, no. 1, pp. 15–25, 2017.
[9] V. C. DAMAYANTI, “Rancang Bangun Sistem Pengunci Loker Otomatis Dengan Kendali Akses Menggunakan Rfid,” Other thesis, Politek. NEGERI SRIWIJAYA., 2017.
[10] D. Nusyirwan, M. D. Aritonang, and P. P. P. Perdana, “Penyaringan Air Keruh Menggunakan Sensor Ldr Dan Bluetooth Hc-05 Sebagai Media Pengontrolan Guna Meningkatkan Mutu Kebersihan Air Di Sekolah,” LOGISTA - J. Ilm. Pengabdi. Kpd. Masy., vol. 3, no. 1, p. 37, 2019, doi: 10.25077/logista.3.1.37-46.2019.
[11] S. J. Sokop, D. J. Mamahit, M. Eng, and S. R. U. A. Sompie, “Trainer Periferal Antarmuka Berbasis Mikrokontroler Arduino Uno,” J. Tek. Elektro dan Komput., vol. 5, no. 3, pp. 13–23, 2016, doi: 10.35793/jtek.5.3.2016.11999.
[12] S. Ultrasonik and M. Komunikasi, “SISTEM PERINGATAN DINI BANJIR AIR LAUT MENGGUNAKAN SENSOR ULTRASONIK MELALUI KOMUNIKASI SMS,” vol. 3, no. 2, pp. 46–50, 2019